Liebert 600T Manuel d'utilisateur télécharger pdf (Page 22)

16 Configuring Your Ground and Neutral Connections

7.4 Preferred Grounding Configuration, 480 or 600 VAC Input and Output, with

Power-Tie™ Switchgear

Figure 4 Preferred Grounding Configuration, Power-Tie™ Systems

Single Module Systems can be used with Power-Tie switchgear to provide dual critical load bus-

ses. The Power-Tie switchgear permits transferring critical loads from one critical bus to the

other so that one UPS module and associated breakers can be de-energized for maintenance. Cer-

tain configurations of Power-Tie equipment also permit the operator to continuously parallel the

output of the UPS modules.

In tied systems, each UPS module must have its neutral solidly connected to its own building ser-

vice neutral and to the Power-Tie switchgear neutral. See Figure 6 above.

NOTE

It is essential to run a neutral connection between the tie switchgear and

both UPS modules as shown in the illustration above.

GROUNDING

ELECTRODE

PER NEC 250-24

GROUNDING

ELECTRODE

PER NEC 250-24

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 72 73

Pas de commentaire

Liebert 600T Manuel d'utilisateur Page 22